Manual · 05

Results

Every kind of file shows its results with the same controls, in the Explorer's Results tab and the strip at the top of the 3D view.

The Viewer shows the values the source program wrote. It does not analyse the model, combine load cases or check designs itself. If a value isn't in the file, it is shown as N/A.

Family, component and case

  1. Family: F Forces, u Displ., ε Strains or σ Stresses. Families the file has no results for are dimmed.
  2. Component: the result within the family — a reaction, an axial force, a displacement magnitude, S Mises. The list is grouped by table or field, with each result's unit. Choose None (no contour) to show the plain model.
  3. Case: the load case, combination, construction stage, step, mode or time history. ‹ and › step through them; Results › Previous and Next do the same.

For a time history or a series of frames, a slider appears under Case with a play button and the time shown.

Deformed shape

Before shows the model as built; After shows it deformed, still coloured by the result you chose. The slider beside it sets the scale; Auto picks a scale that makes the largest displacement easy to see. Results with large displacements (nonlinear, explicit) are drawn at true scale when that is already visible.

Largest and smallest values

With Max/Min on, the largest and smallest values are marked with labels. A value hidden behind the model is labelled “behind” with a dashed outline. Turn on In view to mark the extremes of what you can see — useful once you have zoomed in or cut the model with the clipping box.

Loads

Loads draws the loads of the case shown as arrows. For a combination, the loads are shown factored. Loads are hidden while an animation plays.

Animation

Results › Play animates the case shown: a mode swings back and forth, a time history runs through time, a series of frames plays in order.

Diagrams on members

For beam and frame results, the force along each member can be drawn as a diagram, filled in the colours of the colour key. In a MIDAS model, Results › Member force turns the diagram on and Results › Show values labels each member's ends and peak. The Properties of a selected member show a diagram of each force for the case shown.

Colours

  • Options › Colour scale chooses the bands and the range.
  • Options › Colour map… chooses the colour preset (including an Abaqus-like 12-band rainbow), a logarithmic scale and a fixed range.
  • Result colours are unlit, so the colour on screen matches the key exactly.

Modes

Modes are named by their period, for example Mode 1 (T = 0.529 s). Turn off Options › Name modes by period to name them by frequency.